The input stage features 20 low-noise, high-headroom Xenyx preamps with +48V phantom power and high-pass filter buttons on every channel. A musical 4-band EQ with 2 sweepable frequencies is provided on every mono channel.
The inclusion of direct outputs makes the Xenyx XL2400 a very useful tool in your recording studio, as well as being a fully capable live sound mixer. You can use the direct outputs to send up to 16 additional microphone channels into the line inputs on a computer audio interface. Monitor the playback from your DAW through the XL2400 to utilize its two headphone outputs, and to check your mix against a commercial CD with its CD/Tape input. You can also send your mix to multiple sources through the XL2400 to hear how it translates in different speakers.
For live sound applications the Xenyx XL2400 supplies you with all the functionality you need to create a great mix for multiple sets of stage monitors and in the main house speakers as well. With 6 auxiliary sends, 4 group outputs, 4 stereo channels, and inserts on every mono channel, group, and the main outputs, you have all the control and flexibility you need to handle a large variety of live sound situations. With its powerful set of tools and intuitive layout, the Xenyx XL2400 is hard to beat in a cost/performance ratio.
6 Aux sends per channel, 4 of which feature a pre/post switch
16 1/4" TRS direct outputs on every mono channel (direct output is post fader, with the option to solder as pre fader)
4-Band EQ with sweepable high and low mids
Signal and clip LED lights on every channel, 13-segment LED meter for main and monitor output
Talkback section with XLR mic input, level control, and ability to route to monitors, auxes, groups, and mains
EQ bypass button on every channel
The inclusion of direct outputs makes the Xenyx XL2400 a very useful tool in your recording studio, as well as being a fully capable live sound mixer. You can use the direct outputs to send up to 16 additional microphone channels into the line inputs on a computer audio interface. Monitor the playback from your DAW through the XL2400 to utilize its two headphone outputs, and to check your mix against a commercial CD with its CD/Tape input. You can also send your mix to multiple sources through the XL2400 to hear how it translates in different speakers.
For live sound applications the Xenyx XL2400 supplies you with all the functionality you need to create a great mix for multiple sets of stage monitors and in the main house speakers as well. With 6 auxiliary sends, 4 group outputs, 4 stereo channels, and inserts on every mono channel, group, and the main outputs, you have all the control and flexibility you need to handle a large variety of live sound situations. With its powerful set of tools and intuitive layout, the Xenyx XL2400 is hard to beat in a cost/performance ratio.
6 Aux sends per channel, 4 of which feature a pre/post switch
16 1/4" TRS direct outputs on every mono channel (direct output is post fader, with the option to solder as pre fader)
4-Band EQ with sweepable high and low mids
Signal and clip LED lights on every channel, 13-segment LED meter for main and monitor output
Talkback section with XLR mic input, level control, and ability to route to monitors, auxes, groups, and mains
EQ bypass button on every channel
Total Of Inputs 24
Stereo Line Inputs 4
Outputs
2 x balanced XLR main outputs
2 x balanced XLR "B" outputs
2 x balanced XLR monitor outputs
2 x balanced XLR aux outputs
2 x 1/4" FX outputs
2 x RCA CD/tape outputs
16 x 1/4" TRS Direct outputs
AUX Sends 6 (2 labeled as FX, 2 labeled as monitor, and 2 labeled as aux)
AUX Returns 4 Stereo returns
Inserts Every channel, every group, and mains
2 Trk Master I/O 2 x balanced XLR main outputs
Monitor Outputs
2 x balanced XLR
2 x 1/4" headphone outputs
Independent volume control for headphone and monitor outputs
EQ Section
4-Band EQ with swept high and low mids on all mono channels
4-Band EQ with swept low mid on stereo channels
Effects None
Solo/Mute Solo/mute buttons on every channel
Channel Level Control 60mm Faders
Trim/Gain Control
XENYX Mic preamp
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance -127 dB / 129.7 dB A-weighted
@ 50 Ohm source resistance -126 dB / 128.3 dB A-weighted
@ 150 Ohm source resistance -125 dB / 126.5 dB A-weighted
Phantom Power Yes, +48V, individual channel switches
Metering 13-segment LED main and monitor metering
Signal and peak LEDs on every channel
Frequency Response
To Direct Out
<10 Hz - 50 kHz (-1 dB)
<10 Hz - 100 kHz (-3 dB)
To Insert Send
<10 Hz - 90 kHz (-1 dB)
<10 Hz - 170 kHz (-3 dB)
Signal-to-Noise Ratio 120 dB / 122 dB A-weighted (0 dBu In @ +22 dB Gain)
Total Harmonic Distortion (THD) Typ. 0.0008 %
Dimensions 7.1 x 27.8 x 21.3" (180 x 705 x 540 mm)
Weight 8.6 kg
Stereo Line Inputs 4
Outputs
2 x balanced XLR main outputs
2 x balanced XLR "B" outputs
2 x balanced XLR monitor outputs
2 x balanced XLR aux outputs
2 x 1/4" FX outputs
2 x RCA CD/tape outputs
16 x 1/4" TRS Direct outputs
AUX Sends 6 (2 labeled as FX, 2 labeled as monitor, and 2 labeled as aux)
AUX Returns 4 Stereo returns
Inserts Every channel, every group, and mains
2 Trk Master I/O 2 x balanced XLR main outputs
Monitor Outputs
2 x balanced XLR
2 x 1/4" headphone outputs
Independent volume control for headphone and monitor outputs
EQ Section
4-Band EQ with swept high and low mids on all mono channels
4-Band EQ with swept low mid on stereo channels
Effects None
Solo/Mute Solo/mute buttons on every channel
Channel Level Control 60mm Faders
Trim/Gain Control
XENYX Mic preamp
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance -127 dB / 129.7 dB A-weighted
@ 50 Ohm source resistance -126 dB / 128.3 dB A-weighted
@ 150 Ohm source resistance -125 dB / 126.5 dB A-weighted
Phantom Power Yes, +48V, individual channel switches
Metering 13-segment LED main and monitor metering
Signal and peak LEDs on every channel
Frequency Response
To Direct Out
<10 Hz - 50 kHz (-1 dB)
<10 Hz - 100 kHz (-3 dB)
To Insert Send
<10 Hz - 90 kHz (-1 dB)
<10 Hz - 170 kHz (-3 dB)
Signal-to-Noise Ratio 120 dB / 122 dB A-weighted (0 dBu In @ +22 dB Gain)
Total Harmonic Distortion (THD) Typ. 0.0008 %
Dimensions 7.1 x 27.8 x 21.3" (180 x 705 x 540 mm)
Weight 8.6 kg