The intuitive and efficient PMP1000 is feature packed with eight channels of balanced XLR microphone and 1/4" phone line input connections, 3-band EQ, effects level control and send level. The remaining four inputs (9/10 & 11/12) feature stereo paired 1/4" phone line inputs for keyboards, player/recorders and other stereo line devices.
A seven-band graphic EQ section provides final frequency contouring of audio at the main output. Behringer's FBQ feedback detection system reveals problem frequency bands that may cause feedback and allows users to adjust them. The PMP1000 is a lightweight, portable mixing solution for musicians, and presenters on-the-go.
500 Watt Power Amplifier
Internal 500 watt power amplifier will drive loud speakers directly from the unit. The amplifier provides 250 watts per channel in stereo and 500 watts when bridged mono.
12 Total Input Channels
The PMP1000 features eight mono inputs with balanced XLR microphone and 1/4" phone line inputs. Channels 9/10 & 11/12 are stereo paired with 1/4" phone line inputs for keyboards and stereo line devices.
24 Bit Effects Processor
Internal 24-bit effects processor provide 100 preset effects including delay, chorus, reverb, flanger, phaser, etc.
Seven Band Graphic EQ
A seven-band graphic EQ section provides frequency contouring on output. Behringer's FBQ feedback detection reveals frequencies that may cause feedback and allows users to make EQ adjustments.
Portable Design
The lightweight PMP1000 features rugged construction and built-in handle for easy portability.
A seven-band graphic EQ section provides final frequency contouring of audio at the main output. Behringer's FBQ feedback detection system reveals problem frequency bands that may cause feedback and allows users to adjust them. The PMP1000 is a lightweight, portable mixing solution for musicians, and presenters on-the-go.
500 Watt Power Amplifier
Internal 500 watt power amplifier will drive loud speakers directly from the unit. The amplifier provides 250 watts per channel in stereo and 500 watts when bridged mono.
12 Total Input Channels
The PMP1000 features eight mono inputs with balanced XLR microphone and 1/4" phone line inputs. Channels 9/10 & 11/12 are stereo paired with 1/4" phone line inputs for keyboards and stereo line devices.
24 Bit Effects Processor
Internal 24-bit effects processor provide 100 preset effects including delay, chorus, reverb, flanger, phaser, etc.
Seven Band Graphic EQ
A seven-band graphic EQ section provides frequency contouring on output. Behringer's FBQ feedback detection reveals frequencies that may cause feedback and allows users to make EQ adjustments.
Portable Design
The lightweight PMP1000 features rugged construction and built-in handle for easy portability.
Power Rating
Peak Power:
135 x 135W @ 8Ω
250 x 250W @ 4Ω
500W @ 8Ω bridged mono
RMS Power:
90 x 90W @ 8Ω
130 x 130W @ 4Ω
200W @ 8Ω briged mono
Mic/Line Inputs Balanced XLR Microphone x8
Balanced 1/4" Phone Line x12
Unbalanced Stereo Paired RCA Phono Line x2
Mains Inputs No
In-Line Inputs/Returns No
Aux Sends
Monitor Send: 1/4" Phone x2
FX Send 1+2: Stereo TRS 1/4" Phone
Aux Returns No
Inserts
1/4" TRS Phone
On all mono input channels and PWR AMP stereo output
BUS (Group) Outputs Monitor Send: 1/4" Phone x2
Main Output Main 1 and Main 2: Stereo Paired 1/4" Phone x2
Tape I/O CD/Tape: Unbalanced Stereo Paired RCA Phono x2
Monitor Outputs Monitor Send: 1/4" Phone x2
EQ Section
Low: 80Hz +/- 15dB
Mid: 2.5kHz +/- 15dB
High: 12kHz +/- 15dB
7-Band Graphic EQ
Solo/Mute Mute on all channels, sends signal to Monitor outputs when active
Channel Level Control Fader Controls
Trim/Gain Control Rotary Controls
Phantom Power +48V switched globally
Metering Stereo Peak LEDs
Frequency Response Mic Inputs: 10Hz - 20kHz (-3dB)
Signal-to-Noise Ratio 109dB / 112dB A-weighted (0dBu IN @ +10dB gain)
Total Harmonic Distortion (THD) 0.002% / 0.0018% A-weighted
Power Supply 110 - 240V~, 50/60Hz
Power consumption 500W
Fuse T 5 A H 250V
Dimensions 4.8 x 15.35 x 16.73" (122 x 390 x 425mm) (HxWxD)
Weight 8kg
Peak Power:
135 x 135W @ 8Ω
250 x 250W @ 4Ω
500W @ 8Ω bridged mono
RMS Power:
90 x 90W @ 8Ω
130 x 130W @ 4Ω
200W @ 8Ω briged mono
Mic/Line Inputs Balanced XLR Microphone x8
Balanced 1/4" Phone Line x12
Unbalanced Stereo Paired RCA Phono Line x2
Mains Inputs No
In-Line Inputs/Returns No
Aux Sends
Monitor Send: 1/4" Phone x2
FX Send 1+2: Stereo TRS 1/4" Phone
Aux Returns No
Inserts
1/4" TRS Phone
On all mono input channels and PWR AMP stereo output
BUS (Group) Outputs Monitor Send: 1/4" Phone x2
Main Output Main 1 and Main 2: Stereo Paired 1/4" Phone x2
Tape I/O CD/Tape: Unbalanced Stereo Paired RCA Phono x2
Monitor Outputs Monitor Send: 1/4" Phone x2
EQ Section
Low: 80Hz +/- 15dB
Mid: 2.5kHz +/- 15dB
High: 12kHz +/- 15dB
7-Band Graphic EQ
Solo/Mute Mute on all channels, sends signal to Monitor outputs when active
Channel Level Control Fader Controls
Trim/Gain Control Rotary Controls
Phantom Power +48V switched globally
Metering Stereo Peak LEDs
Frequency Response Mic Inputs: 10Hz - 20kHz (-3dB)
Signal-to-Noise Ratio 109dB / 112dB A-weighted (0dBu IN @ +10dB gain)
Total Harmonic Distortion (THD) 0.002% / 0.0018% A-weighted
Power Supply 110 - 240V~, 50/60Hz
Power consumption 500W
Fuse T 5 A H 250V
Dimensions 4.8 x 15.35 x 16.73" (122 x 390 x 425mm) (HxWxD)
Weight 8kg