High frequency LCR meter could be used, when the frequency response range is wide enough. MPU controlled auto current balance technology is adopted to realize AC+DC current overlap and constant current output from 0 to ±10A. With its low additional error, wide frequency response range and sweep output function, the meter is widely used in DC biased inductance measurement. It also provides a perfect solution for magnetic material analysis.
Bias source
Current range -10A-10A
Current resolution 200mA range: 0.1 mA,
2A range: 1 mA,
6A/10A/20A range: 10 mA
current accuracy ±1% reading±3 digits
Current output mode single point,various points and average point
Frequency response range 50 Hz-200 kHz
Impedance range ωL < 2 kΩ, L<8/I (H),I is output current
Output voltage range 0-8 V
Basic impedance accuracy ≤1%
Sweep mode Manual,auto
Delay time 0-99s available
Warm up time 20 Min
Interface(Option) RS232
Bias source
Current range -10A-10A
Current resolution 200mA range: 0.1 mA,
2A range: 1 mA,
6A/10A/20A range: 10 mA
current accuracy ±1% reading±3 digits
Current output mode single point,various points and average point
Frequency response range 50 Hz-200 kHz
Impedance range ωL < 2 kΩ, L<8/I (H),I is output current
Output voltage range 0-8 V
Basic impedance accuracy ≤1%
Sweep mode Manual,auto
Delay time 0-99s available
Warm up time 20 Min
Interface(Option) RS232