S-2050 is the most powerful single LED on-camera light, adopts SWIT new generation advanced Chip Array LED, which features 160W equivalent light outputs, 2200lx @1m, 50° wider beam angle, glareless and single shadow, suitable for HD recording and close interview. The color temperature is 5000K and can be switched to 5600K and 3200K by the color temperature filters.
The Chip Array LED is a new LED technology which integrates the LEDs into a chip, with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, glareless light similar to the old Halogen bulb light.
The traditional LED array always generates several highlight pots on retina and people will feel glaring, even can’t recover sights after a few seconds. In comparison, the Chip Array LED light S-2040/S-2050 has only one bulb in appearance, and adopts the reflective bowl to output a glareless light.
The traditional lens converged light has higher brightness in the center, but less effective lighting scale. See the following real beam effects: (Shooting and lighting distance: 3 meters; camera focal length: 27mm).
S-2050 is powered by D-tap DC source, 11-17V, and can be fixed on camera by cold shoe or screw mount.
The Chip Array LED is a new LED technology which integrates the LEDs into a chip, with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, glareless light similar to the old Halogen bulb light.
The traditional LED array always generates several highlight pots on retina and people will feel glaring, even can’t recover sights after a few seconds. In comparison, the Chip Array LED light S-2040/S-2050 has only one bulb in appearance, and adopts the reflective bowl to output a glareless light.
The traditional lens converged light has higher brightness in the center, but less effective lighting scale. See the following real beam effects: (Shooting and lighting distance: 3 meters; camera focal length: 27mm).
S-2050 is powered by D-tap DC source, 11-17V, and can be fixed on camera by cold shoe or screw mount.
Input voltage DC 11V-17V
Power consumption 48W
Light output 41W
Equivalent 160W
Beam angle H50° / V50°
Color temperature 5000K and 5600K/3200K switchable
Color rendering index 85
Illuminance 2200Lx @ 1m distance and 1m diameter scale
Power connector D-tap cable
Weight 500g
Dimension 84×157×103mm
Power consumption 48W
Light output 41W
Equivalent 160W
Beam angle H50° / V50°
Color temperature 5000K and 5600K/3200K switchable
Color rendering index 85
Illuminance 2200Lx @ 1m distance and 1m diameter scale
Power connector D-tap cable
Weight 500g
Dimension 84×157×103mm