NEO Series loudspeakers also make excellent onstage monitors for keyboards, acoustic guitars, or any line-level instrument for that matter. You can plug your instrument into MIC/LINE 1 and use the MIC/LINE 2 input to connect the monitor signal from the PA mixing console, so that you can also hear the other members of your band. This opens up lots of possibilities.
If you want to use more than two instruments, you will need a submixer (e.g. XENYX 1204) to mix down the signals.
You will need a special adapter to convert a standard ¼”TS cable to XLR, or a direct injection box such as our ULTRA-DI DI100.
If you want to use more than two instruments, you will need a submixer (e.g. XENYX 1204) to mix down the signals.
You will need a special adapter to convert a standard ¼”TS cable to XLR, or a direct injection box such as our ULTRA-DI DI100.
High-power 1,260-Watt 2-way PA sound reinforcement speaker system with integrated mixer for live and playback applications
Ultra-compact and light weight plastic composite material provides excellent sound even at extreme sound pressure levels (speaker weighs only 19 kg / 41 lbs)
Extremely powerful and light weight 12" neodymium woofer provides incredibly deep bass and acoustic power
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance
State-of-the-art 24-bit digital signal processor for ultimate system control:
- Digital crossover, phase and time correction for perfect driver alignment plus dual compressor/limiter for total system protection
- Digital noise gate, low-cut filter, 2-band EQ, dynamic Contour filter for ultimate sound reproduction
2 Mic/Line inputs (XLR and 1/4" TRS) with individual volume controls and peak LEDs
State-of-the-art 1.75" titanium-diaphragm neodymium compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion and large format exponential/conical horn with multi-cell aperture throat
Additional Line output enables linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
High-quality components and exceptionally rugged construction ensure long life
Active or Passive Active
Frequency Response 45Hz to 20kHz
Power Capacity 800W @ 8 Ohms
1200W @ 8 Ohms
Maximum Sound Pressure Level (SPL) 127dB
Nominal Sensitivity -40 dBu to +10dBu
Impedance 27k Ohms
Crossover 1.54kHz
Low Frequency Driver 12" (308mm) Neodymium
High Frequency Driver 1.75" (44mm)
Input Connections Mic/Line XLR Inputs x2
XLR Male Output
Dimensions (HxWxD) 26 x 15 x 15.5" (660 x 380 x 395mm)
Weight 19kg
Ultra-compact and light weight plastic composite material provides excellent sound even at extreme sound pressure levels (speaker weighs only 19 kg / 41 lbs)
Extremely powerful and light weight 12" neodymium woofer provides incredibly deep bass and acoustic power
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance
State-of-the-art 24-bit digital signal processor for ultimate system control:
- Digital crossover, phase and time correction for perfect driver alignment plus dual compressor/limiter for total system protection
- Digital noise gate, low-cut filter, 2-band EQ, dynamic Contour filter for ultimate sound reproduction
2 Mic/Line inputs (XLR and 1/4" TRS) with individual volume controls and peak LEDs
State-of-the-art 1.75" titanium-diaphragm neodymium compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion and large format exponential/conical horn with multi-cell aperture throat
Additional Line output enables linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
High-quality components and exceptionally rugged construction ensure long life
Active or Passive Active
Frequency Response 45Hz to 20kHz
Power Capacity 800W @ 8 Ohms
1200W @ 8 Ohms
Maximum Sound Pressure Level (SPL) 127dB
Nominal Sensitivity -40 dBu to +10dBu
Impedance 27k Ohms
Crossover 1.54kHz
Low Frequency Driver 12" (308mm) Neodymium
High Frequency Driver 1.75" (44mm)
Input Connections Mic/Line XLR Inputs x2
XLR Male Output
Dimensions (HxWxD) 26 x 15 x 15.5" (660 x 380 x 395mm)
Weight 19kg